a x i a l l e a d t r a n s i e n t v o l t a g e s u p p r e s s o r w orking peak reverse v oltage: 5.0 to 190 v olts peak pulse power: 500 w atts rohs device page 1 rev :a features -glass passivated chip. -low leakage. -500w peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01%. -uni and bidirectional unit. -excellent clamping capability . -v ery fast response time. mechanical data sa5v0-hf thru. sa191-hf series qw -jtv12 comchip t echnology co., l td. peak power dissipation with a 10/1000 s waveform (note 1) peak pulse current with a 10/1000 s waveform (note 1) power dissipation on infinite heatsink at t l =75 c peak forward surge current, 8.3ms single half sine-wave uni-directional only (note 2) maximum instantaneous forward voltage at 25a for uni-directional only (note 3) v alue units symbol characteristics p pp i ppm p d i fsm v f t j, t stg 500 see next t able 3.0 70 3.5/5.0 -55 to +150 w a w a v c d i m e n s i o n s i n i n c h e s a n d ( m i l l i m e t e r ) d o - 1 5 1.000(25.40) min. 0.300(7.63) 0.230(5.85) 0.142(3.61) 0.102(2.60) 0.033(0.84) 0.028(0.71) 1.000(25.40) min. -case: molded plastic do-15 -t erminals: axial leads solderable per mil-std-202 method 208 -polarity: color band denotes positive end (cathode) operating junction and storage temperature range nt oes: (1) non-repetitive current pulse per fig.5 and derated above t a =25c per fig. 1. (2) measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. (3) v f <3.5v for devices of v br <200v and v f <5.0v for devices of v br >201v . -epoxy: ul 94v -0 rate flame retardant -mounting position: any maximum ratings and electrical characteristics ratings at 25c ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. halogen free company reserves the right to improve product design , functions and reliability without notice. -rohs compliant.
qw -jtv12 ra ting and characteristic cur ves (sa5v0-hf thru sa191-hf) pulse width, td ( s) 100 10 1 0.1 fig.4 peak pulse power rating curve 0.1 1 10 100 ambient t emperature, t a (c ) 0 fig.1 pulse derating curve 0 p e a k p u l s e d e r a t i n g p e r c e n t a g e o f p e a k p o w e r o r c u r r e n t , ( % ) 20 40 60 140 75 t ime, (ms) 0 fig.5- pulse w aveform 0 p e a k p u l s e c u r r e n t , ( % ) 25 75 1 2 3 4 comchip t echnology co., l td. page 2 rev :a 50 100 200 150 50 100 a x i a l l e a d t r a n s i e n t v o l t a g e s u p p r e s s o r 10000 1000 25 125 80 100 120 t d pulse width (t d ) is defined as the point where the peak current decay to 50% of i pp t r =10 s peak value i pp half value i pp /2 10/1000 s waveform as defined by r.e.a. lead t emperature, t l (c ) 0 fig.3- steady state power derating curve 0 s t e a d y s t a t e p o w e r d i s s i p a t i o n , ( w ) 0.5 1.5 3.5 25 75 100 200 1.0 3.0 50 125 150 2.5 2.0 number of cycles at 60hz 1 fig.2- maximun non-repetitive surge current 0 80 10 100 20 40 60 8.3ms single half sine-wave (jedec method) t j =t j max. 175 t j =25 c o fig.6- t ypical junction capacitance j u n c t i o n c a p a c i t a n c e , ( p f ) 100 10 1 10 100 1000 1 reverse breakdown v oltage, v br (v) 10000 bi-directional @zero bias uni-directional @zero bias uni-directional @v rwm bi-directional @ v rwm t j =25 f=1.0mhz o c 1000 175 p e a k p o w e r ( k w ) p e a k f o r w a r d s u r g e c u r r e n t , ( a ) company reserves the right to improve product design , functions and reliability without notice.
qw -jtv12 comchip t echnology co., l td. page 3 rev :a a x i a l l e a d t r a n s i e n t v o l t a g e s u p p r e s s o r uni bi maximum reverse surge current @ 10/1000us sinewave i pp (a) maximum clamping v oltage @i pp v c (v) marking code part no maximum reverse leakage @v r wm r i (ua) w orking peak reverse v oltage v r wm (v) 6.40 7.00 10 600 5.0 54.35 9.20 6.67 7.37 10 600 6.0 48.54 10.3 7.22 7.98 10 400 6.5 44.64 1 1.2 sa5v0a(ca)-hf sa6v0a(ca)- hf sa6v5a(ca)- hf sa7v0a(ca)- hf 7.78 8.60 10 150 7.0 41.67 12.0 sa5.0ca sa6.0ca 6.5ca sa sa7.0ca sa180a(ca)- hf 20.00 22.10 1 5 18.0 17.12 29.2 sa200a(ca)- hf 22.20 24.50 1 5 20.0 15.43 32.4 sa220a(ca)- hf 24.40 26.90 1 5 22.0 14.08 35.5 sa190a(ca)- hf 21.10 23.30 1 5 19.0 16.24 30.8 sa140a(ca)- hf 15.60 17.20 1 5 14.0 21.55 23.2 sa150a(ca)- hf 16.70 18.50 1 5 15.0 20.49 24.4 sa160a(ca)- hf 17.80 19.70 1 5 16.0 19.23 26.0 sa170a(ca)- hf 18.90 20.90 1 5 17.0 18.12 27.6 sa240a(ca)- hf 26.70 29.50 1 5 24.0 12.85 38.9 sa260a(ca)- hf 28.90 31.90 1 5 26.0 1 1.88 42.1 sa280a(ca)- hf 31.10 34.40 1 5 28.0 1 1.01 45.4 sa300a(ca)- hf 33.30 36.80 1 5 30.0 10.33 48.4 sa100a(ca)- hf 1 1.10 12.30 1 5 10.0 29.41 17.0 sa1 10a(ca)- hf 12.20 13.50 1 5 1 1.0 27.47 18.2 sa120a(ca)- hf 13.30 14.70 1 5 12.0 25.13 19.9 sa130a(ca)- hf 14.40 15.90 1 5 13.0 23.26 21.5 sa7v5a(ca)- hf 8.33 9.21 1 50 7.5 38.76 12.9 sa8v0a(ca)- hf 8.89 9.83 1 25 8.0 36.76 13.6 sa8v5a(ca)- hf 9.44 10.40 1 5 8.5 34.72 14.4 sa9v0a(ca)- hf 10.00 1 1.10 1 5 9.0 32.47 15.4 14ca sa 15ca sa 17ca sa 16ca sa 1 1ca sa 12ca sa 13ca sa 10ca sa 7.5ca sa 8.5ca sa sa8.0ca 9.0ca sa v br min. (v) i t (v) (ma) v br max. breakdown voltage v@ i t electrical characteristics (sa5v0-hf thru. sa191-hf) sa450a(ca)- hf 50.00 55.30 1 5 45.0 6.88 72.7 sa480a(ca)- hf 53.30 58.90 1 5 48.0 6.46 77.4 sa510a(ca)- hf 56.70 62.70 1 5 51.0 6.07 82.4 sa540a(ca)- hf 60.00 66.30 1 5 54.0 5.74 87.1 45a sa 48a sa 51a sa 54a sa sa580a(ca)- hf 64.40 71.20 1 5 58.0 5.34 93.6 sa600a(ca)- hf 66.70 73.70 1 5 60.0 5.17 96.8 sa640a(ca)- hf 71.10 78.60 1 5 64.0 4.85 103.0 sa700a(ca)- hf 77.80 86.00 1 5 70.0 4.42 1 13.0 58ca sa 60ca sa 64ca sa 70ca sa 58a sa 60a sa 64a sa 70a sa sa330a(ca)- hf 36.70 40.60 1 5 33.0 9.38 53.3 sa360a(ca)- hf 40.00 44.20 1 5 36.0 8.61 58.1 sa5.0a sa6.0a 6.5a sa sa7.0a 18a sa 19a sa 20a sa 22a sa 14a sa 15a sa 17a sa 16a sa 24a sa 28a sa 30a sa 26a sa 1 1a sa 12a sa 13a sa 10a sa 7.5a sa 8.5a sa sa8.0a 9.0a sa 33a sa 36a sa sa430a(ca)- hf 47.80 52.80 1 5 43.0 7.20 69.4 44.40 49.10 1 5 40.0 7.75 64.5 18ca sa 19ca sa 20ca sa 22ca sa 24ca sa 28ca sa 30ca sa 26ca sa 45ca sa 48ca sa 51ca sa 54ca sa 33ca sa 36ca sa sa40ca 43ca sa sa40a 43a sa sa400a(ca)- hf sa900a(ca)- hf 100.00 1 1 1.00 1 5 90.0 3.42 146.0 sa101a(ca)- hf 1 1 1.00 123.00 1 5 100.0 3.09 162.0 sa1 1 1a(ca)- hf 122.00 135.00 1 5 1 10.0 2.82 177.0 sa121a(ca)- hf 133.00 147.00 1 5 120.0 2.59 193.0 90a sa 100a sa 1 10a sa 120a sa sa750a(ca)- hf 83.30 92.10 1 5 75.0 4.13 121.0 sa780a(ca)- hf 86.70 95.80 1 5 78.0 3.97 126.0 sa850a(ca)- hf 94.40 104.00 1 5 85.0 3.65 137.0 sa800a(ca)- hf 88.80 97.60 1 5 80.0 3.86 129.6 75ca sa 78ca sa 85ca sa 80ca sa 75a sa 78a sa 85a sa 80a sa sa131a(ca)- hf 144.00 159.00 1 5 130.0 2.39 209.0 sa141a(ca)- hf 155.00 171.00 1 5 140.0 2.20 226.8 sa151a(ca)- hf 167.00 185.00 1 5 150.0 2.06 243.0 sa161a(ca)- hf 178.00 197.00 1 5 160.0 1.93 259.0 90ca sa 100ca sa 1 10ca sa 120ca sa 130ca sa 140ca sa 150ca sa 160ca sa 130a sa 140a sa 150a sa 160a sa company reserves the right to improve product design , functions and reliability without notice.
uni bi maximum reverse surge current @ 10/1000us sinewave i pp (a) maximum clamping v oltage @i pp v c (v) marking code part no maximum reverse leakage @v r wm r i (ua) w orking peak reverse v oltage v r wm (v) v br min. (v) i t (v) (ma) v br max. breakdown voltage v@ i t sa171a(ca)-hf 189.00 209.00 1 5 170.0 1.82 275.0 170ca sa 170a sa sa181a(ca)-hf 200.00 220.00 1 5 180.0 1.71 291.6 180ca sa 180a sa sa191a(ca)-hf 21 1.00 232.00 1 5 190.0 1.62 307.8 190ca sa sa190a a x i a l l e a d t r a n s i e n t v o l t a g e s u p p r e s s o r electrical characteristics (sa5v0-hf thru. sa191-hf) qw -jtv12 comchip t echnology co., l td. page 4 rev :a 1) suf fix a denotes 5% tolerance devices. 2) add suf fix c or ca after part number to specify bi-directional devices. 3) for bi-directional devices having v r of 10 volts and under , the i r limit is double. note: company reserves the right to improve product design , functions and reliability without notice.
qw -jtv12 comchip t echnology co., l td. page 5 rev :a comchip t echnology co., l td. rev :a b t aping specification for axial lead diodes(for reel package) l 1 l 2 e t z t e d d 90 5 d o d 1 w b z t e d l 1 - l 2 d o - 1 5 s y m b o l a ( m m ) ( i n c h ) 0 . 0 3 9 ( m a x ) 5 . 0 0 0 . 5 5 2 . 0 0 . 5 7 2 . 0 3 . 0 6 . 0 0 . 4 1 . 0 ( m a x ) 3 3 0 1 . 2 ( m a x ) 3 ( m a x ) 2 . 0 4 7 0 . 0 2 0 0 . 1 9 7 0 . 0 2 0 0 . 0 4 7 ( m a x ) 0 . 2 3 6 0 . 0 1 6 0 . 1 1 8 ( m a x ) 1 3 s y m b o l ( m m ) ( i n c h ) 2 . 8 3 5 0 . 1 1 8 d 1 d o w 8 5 . 7 0 . 3 3 . 3 7 4 0 . 0 1 2 1 6 . 6 0 . 4 0 . 6 5 4 0 . 0 1 6 d o - 1 5 a x i a l l e a d t r a n s i e n t v o l t a g e s u p p r e s s o r d -15 o standard packaging c a s e t y p e 4 , 0 0 0 r e e l ( p c s ) reel size (inch) 1 3 r e e l p a c k company reserves the right to improve product design , functions and reliability without notice.
qw -jtv12 comchip t echnology co., l td. page 6 rev :a b t aping specification for axial lead diodes (for ammo package) b z t e l 1 - l 2 d o - 1 5 s y m b o l a ( m m ) ( i n c h ) 0 . 0 3 9 ( m a x ) 5 . 0 0 0 . 5 5 2 . 0 0 . 5 6 . 0 0 . 4 1 . 0 ( m a x ) 1 . 2 ( m a x ) 3 ( m a x ) 2 . 0 4 7 0 . 0 2 0 0 . 1 9 7 0 . 0 2 0 0 . 0 4 7 ( m a x ) 0 . 2 3 6 0 . 0 1 6 0 . 1 1 8 ( m a x ) l 1 l 2 e t z t e 90 5 standard packaging l h w c a s e t y p e a m m o p a c k a g e 2 d o - 1 5 b o x / c a r t o n 1 0 2 0 in n e r b o x ( k ) c a r t o n ( k ) ( e a ) in n e r d im e n s io n b o x ( l * w * h ) 2 5 2 * 8 0 * 1 1 7 3 1 0 3 0 2 6 0 * 7 5 * 1 4 5 a x i a l l e a d t r a n s i e n t v o l t a g e s u p p r e s s o r company reserves the right to improve product design , functions and reliability without notice.
|
